DL-SRS020 Calibration Fluid CV
Обзор
DL-SRS020 Calibration Fluid CV (tare 20l plastic can )
SRS Calibration Fluid CV is a low viscosity test-oil for the calibration of diesel injection pumps with a very close viscositytolerance. It is noted for its excellent wear-, corrosion-protection and low foaming tendency
Specifications
SRS Calibration Fluid CV meets the ISO standard 4113-CV-AW. SRS Calibration fluid CV is recommended by Bosch(VS 15665-OL-CV), MTU, MAN and Volkswagen. Further it is approved by MTU as a corrosion preventive oil for internalpreservation of fuel systems.
Approvals / Recommendations
- ISO-standard 4113-CV-AW
- Bosch-standard VS 15665-OL-CV
- Bosch-Approval
- MTU-Approval as a corrosion protection oil for inside preservation or conservation of fuel systems
- MAN-Approval
SRS Calibration Fluid CV is a product of the H&R ChemPharm GmbH.
| Typical data | Test method | SRS Calibration Fluid CV |
| Density at 15°C g/cm³ | DIN 51 757 | 0.824 |
| Viscosity at 20°C mm²/s | DIN EN ISO 3104 | 3.85 |
| Viscosity at 40°C mm²/s | DIN EN ISO 3104 | 2.52 |
| Flash point PM °C | DIN EN ISO 2719 | 115 |
| Cloud point °C | ASTM D 2500 | - 28 |
| Initial Boiling Point °C | DIN 51 751 | 232 |
| Final Boiling Point °C | DIN 51 751 | 265 |
| Steel Corrosion Test Grade | DIN ISO 7120 | 0 – A |
| Copper Corrosion Test Grade | DIN ISO 2160 | 1 |
| Corrosion Protection: | ||
| Humidity Cabinet Test Grade | ASTM D 1748 | 6 x 0 |
The above values may vary within the commercial limits.