DL-GR7400 Grinding machine for nozzle needles with rotation speed indicators in percent
Обзор
DL-GR7400 Grinding machine for nozzle needles with rotation speed indicators in percent
The machine DL-GR7400 is used to sharpen the nozzle needles and other bodies of rotation.
The machine is controlled by a PWM regulators.
Rotation speed of the spindle and the machined body is adjusted by rotary knobs located on the control panel.
The brightness adjust using the rotary knob located at the top of thecontrol panel. On the control panel there is a switch for the general
power supply of the machine and three power switches for each electric motor of the corresponding drive and the lower illumination.
On the backside of the machine, there is a connector for the powercable 220V, two 220V sockets and a 12V socket for connecting a monitor.
On the front side of the machine is a 12 Volt connector for connecting
the power cable of the motor to drive the bodies of rotation.
SET OF DELIVERY
- Grinding machine with grinding wheel 400
- Drive pulley with an inner diameter of 3 mm
- Drive pulley with an inner diameter of 4 mm
- Drive pulley with an inner diameter of 7 mm
- Grinding wheel repair pen with holder
- Power supply cable 220 Volt
- Manual
Technical data
The maximum spindle rotation speed is 7400 rpm
The maximum speed of the sharpened body is 1000 rpm (*2000)
Main motor power supply voltage is 46 V.
Power supply voltage of the electric motor drive – 12 V.
Grinding wheel – fine-grained electrocorundum
* Special order
The grinding machine DL-GR7400 can be used together with microscope set DL-UNI20025 or set DL-UNI20030
which include : digital microscope, holder, light and monitor. Those sets are NOT included in the set of delivery of the GR7300!
DL-GR1080 Angle measuring kit
DL-GR1080 Angle measuring kit
Set of delivery:
1. Angle measurer
2. Bracket
3. Shaft NG31249
4. Screw set М4 (3pcs)
Technical data:
1. Measurement range: 0-360 degrees
2. Resolution: 0,1 degrees
3. Accuracy : +- 0,2 degrees
4. Error : 0,1 degrees
5. Battery : 3V CR20032
6. Battery life: 1 year
DL-GR1090 Angle measurement kit
DL-GR1090 Angle measurement kit of high accuracy
Scope of delivery:
1. Digital protractor
2. Bracket for protracktor
3. Shaft NG50205
4. Screw set М4 (2pcs)
Technical details:
1. Measurement range: 0-360 degr.
2. Resolution: 0,005 degr (10 sec)
3. Accuracy : +- 0,2 degr
4. Error : 0,08 degr ( ±30 sec)
5. Working temperature range: 0 ÷ 40°С
6. Battery : 3V CR20032
7. Battery lifetime : 1 year
The two lines simultaneously display the
measurement value in degrees (upper
line) and in seconds (lower line)
DL-NG31263
Caliber to set the angle of 60 degrees (sold separately)
DL-UNI20025 (DL-UNI20030) Set with microscope
DL-UNI20025 Industrial microscope with monitor, elongated stand and backlight
The microscope has a clear image and high resolution
Specifications:
1. Multiplicity of magnification of the microscope: 8x-130x
2. Working distance: 50-200 mm
3. Connecting to the monitor through the ports: HDMI / VGA
4. The size of the microscope (width x length): 40mm x 115mm
Contents of delivery:
1. DL-UNI20016 Microscope electronic industrial with power
supply.
2. DL-UNI20019 Holder for the microscope
3. DL-UNI20018 Diode lamp for the microscope.
4. DL-UNI20021 Monitor
5. DL-UNI20022 Monitor holder with a diameter of 25 mm
ATTENTION! All the equipment included in the delivery is sold
also separately!
1. Connecting to the monitor through the ports: VGA; HDMI
2. Sensor: Panasonic 1/3 inch 14 MP
3. Image format: jpg, png, tiff
4. Image resolution: 1280x1024 (для HDMI), 1280x1024 (для USB)
5. Video format: MP4
6. Video resolution: 720pHD/1280x1024
7. Frame frequency: 60FPS
8. White balance: Auto
9. Light: Auto
10.Menu language: english
11.Magnification: 8-100X
12.Focus regul:objective
13.Working distance: 55 mm-130 mm
14.Field of vision: 2,4 mm-32 mm
15.Connection of the lens with electronic unit> threaded F25
16.Power supply: 5V, 2А
17.Size of electronic unit: 70х50х50 mm
18.Objective size: 115 mm (L) * 40 mm (dia)
19.Electronic unit weight: 210 g
20.Objective weight: 208 g
Contents of delivery:
1. DL-UNI20016 Microscope electronic industrial with power
supply.
2. DL-UNI20019 Holder for the microscope
3. DL-UNI20018 Diode lamp for the microscope.
4. DL-UNI20021 Monitor
5. DL-UNI20022 Monitor holder with a diameter of 25 mm
ATTENTION! All the equipment included in the delivery is sold
also separately!
DL-UNI20030 Industrial microscope with monitor, elongated stand and backlight
Specifications:
1. Sensor: Panasonic 1/3 inch 14 MP
2. Image format: jpg, png, tiff
3. Image resolution: 4320*3240(for HDMI), 1080*1920(for USB)
4. Video format: MP4
5. Video resolution USB:1920*1080
6. Frame per second: 60FPS
7. White balance: Auto
8. Light:Аuto
9. Menu language:english
10.Magnification: 8-100X
11.Focus regul:objective
12.Working distance: 55 mm-130 mm
13.Field of vision: 2,4 mm-32 mm
14.Connection of the lens with electronic unit> threaded F25
15.Power supply: 5V, 2А
16.Size of electronic unit: 70х50х50 mm
17.Objective size: 115 mm (L) * 40 mm (dia)
18.Electronic unit weight: 210 g
19.Objective weight: 208 g
20.Connectors: USB / HDMI
Contents of delivery:
1. DL-UNI20016 Microscope electronic industrial with power
supply.
2. DL-UNI20019 Holder for the microscope
3. DL-UNI20018 Diode lamp for the microscope.
4. DL-UNI20021 Monitor
5. DL-UNI20022 Monitor holder with a diameter of 25 mm
ATTENTION! All the equipment included in the delivery is sold
also separately!
Extra
DL-UNI20200 Grinding wheel grid 400
DL-UNI20201 Grinding wheel grid 200
DL-UNI20202 Grinding wheel grid 100
DL-UNI20203 Grinding wheel conical grid 320
DL-UNI20204 Grinding wheel conical grid 230
DL-GR1050 Grinding wheel holder
DL-GR60007 Diamond pen for dressing of grinding wheels (standard)
DL-GR60008 Diamond pen for dressing of grinding wheels (reinforced)
DL-GR1060 Shaft for balancing grinding wheel
DL-GR1070 Balancing delice
ATTENTION! GR7300 grinding machine set of delivery does not include balancing device, holder and shaft!
DL-NG50196 Grinding wheel remover
DL-CR50209 Collet BOSCH Piezo Injector Valve Holder for Restoration
DL-NG31253 Valve holder for BOSCH piezo injector for grinding
DL-NG31263 60 Angle Caliber (For GR-7300/7400/7500 machines)
DL-NG50260 Device for dressing the grinding wheel at an angle
