DL-UNI20060 PR-TESTER.V05

Electronic pressure gauge 2-channel in an aluminum case for measurement on ONE channel.
The electronic pressure gauge is designed to control the diesel fuel supply pressure in diesel injection control systems Bosch, DENSO, DELPHI, Siemens VDO Common Rail systems.
To perform measurements, it is necessary to connect to the pressure sensor in the fuel rail of the diesel engine using the cables that come with the electronic pressure gauge.

Measurement and control of high pressure of diesel fuel in the fuel rail is carried out directly during operation, without disrupting communication with the engine ECU.

With this pressure gauge, you can measure the pressure in the CR fuel rail on the bench when checking the injection pump

Connection method for electronic pressure gauge:
This high pressure meter is connected in parallel.
DL-UNI20070 The main adapter cable for the single-channel version is connected to the electronic pressure gauge connector on one side and on the other side to the adapter cable of the type of pressure sensor to which you need to connect.
The pressure transducer adapter cable has two connectors:
- the first connector connects directly to the pressure sensor
- the second connector is connected to the connector that was removed from the pressure sensor.

Specifications:
Total measuring range: 0-3000 bar
Power supply of the device: battery 1.5 v
Working temperature: 0-60 ° C.

DL-UNI20061 PR-TESTER.V05
Electronic pressure gauge 2-channel in an aluminum casing for measuring pressure on two channels simultaneously.
The electronic pressure gauge is designed to control the supply pressure of diesel fuel in diesel injection control systems Bosch, DENSO, DELPHI, Siemens VDO Common Rail systems.
To perform measurements, it is necessary to connect to the pressure sensor in the fuel rail of the diesel engine using the cables that come with the electronic pressure gauge.

Measurement and control of high pressure of diesel fuel in the fuel rail is carried out directly during operation, without disrupting communication with the engine ECU.

With this pressure gauge, you can measure the pressure in the CR fuel rail on the bench when checking the injection pump

Connection method for electronic pressure gauge:
This high pressure meter is connected in parallel.
The main adapter cable (DL-UNI20071) for the two-channel version has a branch for the possibility of connecting two pressure sensors at the same time.
The main adapter cable (DL-UNI20071) is connected to the connector of the electronic pressure gauge on one side and on the other side to the adapter cables of the type of pressure sensor to which you need to connect.
The pressure transducer adapter cable has two connectors:
- the first connector connects directly to the pressure sensor
- the second connector is connected to the connector that was removed from the pressure sensor.

Specifications:
Total measuring range: 0-3000 bar
Power supply of the device: battery 1,5 v
Working temperature: 0-60 ° C.