DL-CR50311KIT Kit with indicator for measuring the height of washers and springs of CRI1/CRI2 injectors
Обзор
DL-CR50311KIT Kit with CIG for measuring the height of washers and springs of CRI1/CRI2 injectors
A set with a digital indicator for measuring the height of washers and springs, consists of a base, 3 interchangeable adapters, an adapter and a digital indicator DL-KIP0036.
Adapters CR31584 and DL-CR31585 are used to measure the height of washers Ahe and Rls respectively, for injectors of the CRI1/CRI2 type, DL-CR31583 is used to measure the height of the injector spring of the same type. For a quality measurement, the digital measuring indicator has an accuracy of 0.001 mm and a stroke of 25 mm.
CONTENTS OF DELIVERY:
| № | Article | Name | Amount | Image |
| 1 | DL-CR31586 | Base | 1 pc |  |
| 2 | DL-CR31583 | Spring Height Adapter | 1 pc |  |
| 3 | DL-CR31584 | Ahe shim height adapter | 1 pc |  |
| 4 | DL-CR31585 | Rls shim height adapter | 1 pc |  |
| 5 | Shim and spring height adapter | 1 pc |  |
|
| 6 | DL-KIP0036 | Measuring indicator точностью 0,001 mm, stroke 25 mm | 1 pc |  |
Spring height measurement sequence:
Screw the DL-CR31583 adapter into the digital indicator rod;
Install and fix the height measurement adapter on the digital indicator with a stud bolt;
Reset the digital indicator by placing it on a hard, polished surface;
Install the spring to be measured on the base pin DL-CR31586 from the kit;
Place the digital indicator on the base pin with the spring installed;
To improve accuracy, measure 3 times.
The sequence for measuring the height of washers Ahe/Rls:
Screw the appropriate adapter CR31584 or DL-CR31585 into the digital indicator rod;
Install and fix the height measurement adapter on the digital indicator with a stud bolt;
Place the washer to be measured on a hard, sanded surface;
Position the adapter relative to the washer so that it covers its entire surface;
Firmly press the digital indicator with the installed adapter to the washer, then press "ZERO";
When the efforts are weakened and the digital indicator is pressed away from the washer, the required value will be displayed on the digital indicator display;
To improve accuracy, measure 3 times.
DL-CR50311 Accessory kit without measuring indicator
DL-CR50311 CRI1/CRI2 Washer and Spring Height Gauge Kit and Adapter
A set of devices for measuring the height of the washers and the height of the springs, consists of a base, 3 interchangeable adapters and an adapter.
Adapters CR31584 and DL-CR31585 are used to measure the height of washers Ahe and Rls respectively, for injectors of the CRI1/CRI2 type, DL-CR31583 is used to measure the height of the injector spring of the same type. For a quality measurement, the required accuracy of the digital measuring indicator must be 0.001 mm and a stroke of 25 mm.
A measuring indicator with the required accuracy can be purchased separately, DL-KIP012 and DL-KIP0036 are suitable for this measurement.
CONTENTS OF DELIVERY :
| № | Article | Name | Amount | Image |
| 1 | DL-CR31586 | Base | 1 pc | |
| 2 | DL-CR31583 | Spring Height Adapter | 1 pc | |
| 3 | DL-CR31584 | Ahe Washer Height Adapter | 1 pc | |
| 4 | DL-CR31585 | Rls washer height measuring adapter | 1 pc | |
| 5 | Adapter for measuring the height of washers and springs | 1 pc | |
Spring height measurement sequence:
- Screw the DL-CR31583 adapter into the measuring indicator rod;
- Install and fix the height measurement adapter on the measuring indicator with a stud bolt;
- Reset the measuring indicator by placing it on a hard, polished surface;
- Install the spring to be measured on the base pin DL-CR31586 from the kit;
- Place the measuring indicator on the base pin with the spring installed;
- To improve accuracy, measure 3 times.
The sequence for measuring the height of washers Ahe/Rls:
- Screw the appropriate adapter CR31584 or DL-CR31585 into the measuring indicator rod;
- Install and fix the height measurement adapter on the ZIG with a stud bolt;
- Place the washer to be measured on a hard, sanded surface;
- Position the adapter relative to the washer so that it covers its entire surface;
- Firmly press the measuring indicator with the installed adapter to the washer, then press "ZERO";
- When the efforts are weakened and the measuring indicator is pressed away from the washer, the required value will be displayed on the measuring indicator display;
To improve accuracy, measure 3 times.
DL-CR50306 Tool kit without measuring indicator and adapter
DL-CR50306 Set of tools for measuring the height of washers and springs of CRI1/CRI2 injectors without adapter and measuring indicator
A set of devices for measuring the height of the washers and the height of the springs, consists of a base and 3 interchangeable adapters.
Adapters CR31584 and DL-CR31585 are used to measure the height of washers Ahe and Rls respectively, for injectors of the CRI1/CRI2 type, DL-CR31583 is used to measure the height of the injector spring of the same type. For a quality measurement, the required accuracy of the digital measuring indicator must be 0.001 mm and a stroke of 25 mm.
A measuring indicator with the required accuracy can be purchased separately, DL-KIP012 and DL-KIP0036 are suitable for this measurement. Also, for the measurement, you will need an adapter for zeroing the measuring indicator readings and measuring the height relative to the plane, which can also be purchased separately.
CONTENTS OF DELIVERY:
| № | Article | Name | Amount | Image |
| 1 | DL-CR31586 | Base | 1 pc | |
| 2 | DL-CR31583 | Spring Height Adapter | 1 pc | |
| 3 | DL-CR31584 | Ahe Washer Height Adapter | 1 pc | |
| 4 | DL-CR31585 | Rls washer height measuring adapter | 1 pc | |
Spring height measurement sequence:
- Screw the DL-CR31583 adapter into the measuring indicator rod;
- Install and fix the height measurement adapter on the measuring indicator with a stud bolt;
- Reset the measuring indicator by placing it on a hard, polished surface;
- Install the spring to be measured on the base pin DL-CR31586 from the kit;
- Place the measuring indicator on the base pin with the spring installed;
- To improve accuracy, measure 3 times.
The sequence for measuring the height of washers Ahe/Rls:
- Screw the appropriate adapter CR31584 or DL-CR31585 into the measuring indicator rod;
- Install and fix the height measurement adapter on the ZIG with a stud bolt;
- Place the washer to be measured on a hard, sanded surface;
- Position the adapter relative to the washer so that it covers its entire surface;
- Firmly press the measuring indicator with the installed adapter to the washer, then press "ZERO";
- When the efforts are weakened and the measuring indicator is pressed away from the washer, the required value will be displayed on the measuring indicator display;
To improve accuracy, measure 3 times.