DL-CR31497 Adapter for measuring pressure of the CR feed pump
To check the pressure inside the CR pump, remove the metering valve and replace with an adapter. A dispenser is installed on the adapter and a pressure gauge is connected to the fitting through a PVC tube.

ATTENTION! The adapter is delivered without tube fittings and pressure gauge!

In addition to the adapter, you can purchase:
1. DL-SP09550 Straight fitting М5х4mm (herringbone)
2. DL-SP09560 Banjo fitting (set) М5х4 (herringbone)
3. DL-SP09570 L-shaped "fast" adapter М5х4mm
4. DL-SP09580 Female connector 1/4 "x4mm for manometer
5. DL-PVH0402 Flexible PVC tube ø 4mm
6. D-12-TV63-010 10 bar pressure gauge with 1/4 "bottom connection
7. D-12-TV63-016 16 bar pressure gauge with 1/4 "bottom connection

DL-CR31497KIT Adapter kit for pressure measurement of the CR feed pump
To check the pressure inside the CR pump, remove the metering valve and replace with an adapter. A dispenser is installed on the adapter and a pressure gauge is connected to the fitting through a PVC tube.

THE DELIVERY SET INCLUDES:
1. DL-SP09570 L-shaped "quick" adapter М5х4mm
2. DL-SP09580 Female connector 1/4 "х4mm for manometer
3. DL-PVH0402 Flexible PVC tube ø 4mm (100cm)
4. D-12-TV63-016 Pressure gauge 16 bar with 1/4 "bottom connection