DL-44-01 Basic kit for testing CR injectors
Обзор
Scope of delivery of basic kit COMMON RAIL DL-44-01:
ELECTRONIC COMPONENTS:- 1 CR1 CR-Tester , 4 channel signal simulator 1 pcs.
- 2 CR2 Basic cable set 1 pcs.
- 3 CR3 Connector-adapter (male) for power supply of injector with threated terminals 1 pcs.
- 4 CR4 Connector-adapter for power supply of Delphi injector 1 pcs.
- 6 CR6 Connector-adapter for power supply of BMW injector 1 pcs.
- 7 CR7 Pressure sensor ( 0281002921 -1800Bar) 1 pcs.
- 8 CR8 Pressure regulator (0281002494) 1 pcs.
Mechanic components:
- 9 CR9 BOSCH СP3 Pump ...088 1 pcs.
- 10 CR10 Rail for 4 injector with 2(3) pressure regulators 1 pcs.
- 11 CR11 Fitting for rail CR10 М14хМ14, washers included 5 pcs.
- 12 CR12 Fitting for rail CR10 М14хМ12(M14), washers included 1 pcs.
- 13 CR14 Manometer 0-2000 bar 1 pcs.
- 14 CR15 Adapter for manometer 1/2”x М14 1 pcs.
- 15 CR16 Manometer holder 1 pcs.
- 16 CR17 High pressure pipe М14ХМ12(M14)х300mm for manometer 1 pcs.
- 17 CR18 High pressure pipe М12ХМ12(M14) х300mmfor pump 1 pcs.
- 18 CR19 Injector high pressure pipes M14XM14 х300mm 4 pcs.
- 19 CR20 Injector high pressure pipes М12ХМ14 х300mm 4 pcs.
- 20 CR21 Bracket adapter for pump, dia.107mm. 1 pcs.
- 21 CR22 Connecting clutch for pump 1 pcs.
- 22 CR23 Cylindrical adapter for fitting of BOSCH-DENSO injectors 4 pcs.
- 23 CR24 Cylindrical adapter for fitting of DELPHI injectors 4 pcs.
- 24 CR25 Clip (injection cell) for injector nozzles 7mm 4 pcs.
- 25 CR26 Foam damper 8 pcs.
- 26 CR27 Quick coupling adapters (angled, dia. 6mm) 4 pcs.
- 27 CR28 Quick coupling adapters (strait, dia. 6mm) 8 pcs.
- 28 CR29 PVC pipe dia. 6mm 16 м.
- 29 CR30 Plug М14 for rail 4 pcs.
- 30 CR31 Plug for replacing of pressure regulator 1(2) pcs.
- 31 CR32 Plug М18х1,5mm (instead of pressure sensor 1800Bar) 1 pcs.
- 32 CR33 Plug М12х1,5mm (instead of pressure sensor 1500Bar) 1 pcs.
- 33 CR34 PVC hose 10mm for pump supply 1.5m
- 34 CR35 Backflow fitting for BOSCH injectors 4 pcs.
- 35 CR36 Backflow fitting for DENSO injectors 4 pcs.
- 36 CR37 Fitting bolts for injectors backflow fitting 4 pcs.
- 37 CR38 Connecting fittings for rail (2fittings for backflow 12mm+2 fitting bolts М12) 1 kit.
- 38 CR39 Frame injector-holder. 1 pcs.
- 39 CR40 Rail bracket- holder on frame 1 pcs.
- 40 CR41 Kit of fasteners for rail and frame 1 pcs.
- 41 CR42 Protective cover 1 pcs.