CRistina repair- and testing complex is dedicated to assembing and disassembling Bosch, Denso and Delphi Common Rail inejctors according to manufacturer specified steps and mechanical tolerances. The complex offers the ability to measure relevant mechanical tolerances of the injector parts and electrical characteristics of the electromagnet. The assembly/dissembly steps and critical measurement points are presented by convenient step-by-step instructions descriptions and relevant images of the work process itself.

BASIC SET:

1. DL-CRN005 Stand Cristina for measuring and adjusting the parameters of the injector
2. DL-KIP020TESA Digital indicator TESADigico 305M1 12,5/0,001
3. DL-KIP021 USB Interface for digital indicator TESADigico 305M1
4. DL-CRN50094 Set of probes (11pcs.)
5. DL-CRN50099 Set of adapters (4pcs.)
6. DL-CRistina Valve stroke actuator with set of cables :

• Power supply cable 220V.
• Extension cable-adapter
• Universal cable adapter for cars.
• Cable adapter for trucks
• Earth lead
• Crocodile type connector for earth lead
• Plug for resistance calibration
• Cable USB A plug; USB B plug
• Cable USB A plug; USB B micro plug

7. Software CRistina
8. Manual

FULL SET:

1. DL-CRN005 Stand Cristina for measuring and adjusting the parameters of the injector
2. DL-KIP020TESA Digital indicator TESADigico 305M1 12,5/0,001
3. DL-KIP021 USB Interface for digital indicator TESADigico 305M1
4. DL-CRN50094 Set of probes (11pcs.)
5. DL-CRN50099 Set of adapters (4pcs.)
6. DL-CRistina Valve stroke actuator with set of cables :

• Power supply cable 220V.
• Extension cable-adapter
• Universal cable adapter for cars.
• Cable adapter for trucks
• Earth lead
• Crocodile type connector for earth lead
• Plug for resistance calibration
• Cable USB A plug; USB B plug
• Cable USB A plug; USB B micro plug

7. Software CRistina
8. Manual

9. D-MV200UM Electronic microscope,
10.D-07147122 Torque wrench 1/2" , 20-100 N,
11. DL-CR50104 Kit of tools to extract and re-place the fiber ring of the CR nozzleholders.
12. DL-UNI30390 CR nozzle holder wrench, 30mm.
13. DL-UNI30389 CR nozzle holder wrench, 29mm.

14. DL-UNI30435 Wrench for opening the solenoid of the CR (Cummins) nozzleholder, 28
15. DL-UNI30434 Wrench for opening the solenoid of Common Rail Man nozzleholder,27
16. DL-UNI50046 Dismounting wrench for CR Nippodenso injector ring-nut.
17. DL-UNI30545 Dismounting wrench for CR Siemens injector ring-nut

18. DL-UNI50050 Wrench set for mounting CR injector solenoid nut-octagon 16, 17.5 Hexagon 14, 15, 17, 19, UNI30382 Hexagonal open wrench with dinamometric connection of 1/2".
19. DL-CR30561 Special bit SW 10.
20. DL-TORX10 Wrench for mounting and dismounting internal ring-nut 10mm, torx, Bosch CR

21. DL-TORX12 Wrench for mounting and dismounting internal ring-nut 12mm, torx, Bosch CR

22. DL-AP2 Tweezers, non-magnetic
23. DL-08CR5-244 Set of shims 55 pcs
24. DL-09CR5-219 Set of shims 55 pcs
25. DL-11CR5-236 Set of shims 55 pcs
26. DL-12CR5-245 Set of shims 130 pcs

27. DL-16CR5-232 Set of shims 60 pcs.
28. DL-18CR5-271 Set of shims 55 pcs
29. DL-19CR5-273 Set of shims 55 pcs.
30. DL-25CR5-288 Set of shims 55 pcs.
31. DL-28CR5-287 Set of shims 110 pcs
32. DL-125BIZON Bench vice L=250mm
33. DL-STN Special worktable :

• 2 drawers
• Perforated backplate
• Lamp with mounting brackets
• Shelf for notebook
• Shelf for device

34. PC or notebook
35. DL-KIP010 Digital indicators 0,01 (1pc.)

36. DL-KIP011 Digital indicator 0,001(2pc.)

37. DL-KIP012 Digital indicator 25,4 mm, 0,001mm (1 pc.)
38. DL-ST-01 Special clamp device.
39. D-07147120 Torque wrench 1/4"-1/2" , 1-25 N
40. D-1012020001 Stainless steel tray
41. D-M035 Digital micrometer

42. DL-M040 Micrometer stand
43. DL- CRN50113 Set of protractors,
44. DL-TX10 Т-key Тх 10.
45. DL-TX25 Т-key 2,5 mm.
46. DL-TX30 Т-key 3 mm.
47. DL-TR13U Wrench 13 mm.
48. DL-TR14U Wrench 14 mm.
49. DL-TR15U Wrench 15 mm.
50. DL-TR19U Wrench 19 mm.

51. DL-CR50052 Device for refilling the hydro compensator of Bosch piezo injector
52. DL- UNI50043 Universal clamp for fixation in vise CR injectors

53. DL-UNI50032 Clamp for fixation in vise CR Denso
54. DL-1219KIT Set of wrenches/ring spanners12mm,13mm,14mm,15mm,17mm,19mm

55. DL-UNI30776 Adapter dor torque wrench