FLAGMAN CRT-5040 (CR-Tester) Device for testing CR injectors (suitable for measuring unit MUFI-CR)
CRT 5040. Controller of Common Rail Fuel System “FLAGMAN”
The device FLAGMAN “CRTester. CRT-5040 ” is designed to diagnose CommonRail injectors manufactured by Bosch, Denso, Delphi, Siemens VDO on the test bench. Injector testing is provided by feeding the control signal from the controller to the tested injectors and maintaining the required pressure in the system according to the selected test plan.
The device provides:
simultaneous control of 1-4 injectors;
pressure control in the system in manual and automatic mode;
control of electromagnetic injectors of the passenger car with a voltage of 14V;
control of electromagnetic injectors of the cargo series with a voltage of 28V;
control of piezoelectric injectors;
control of the measuring unit shutter;
disabling control in the absence of a safety screen in the test area;
control of the HP pump drive stopping after the end of the test;
temperature measurement in the tank;
measuring the injector backflow temperature;
measuring the timing of the injection;
control of the cooler and heater;
control of the injector flow and backflow measurement .
* Common-Rail HP pump (Common Rail systems CP1, CP3) control;
* frequency converter control ;
* control of the frequency and direction of the HP pump drive;
* Functions are additional options and are not included in the basic version of the device!