Валюта: Р $

Корзина: пусто

ОБЩАЯ СУММА (с учетом скидки)пусто

Перейти в корзину

DL-SRS200 Calibration Fluid CV (tare 200l)

Article: no article
В наличии
0 Р
Количество:
  • Overview

Обзор

DL-SRS200 Calibration Fluid CV (tare 200l)

SRS Calibration Fluid CV is a low viscosity test-oil for the calibration of diesel injection pumps with a very close viscositytolerance. It is noted for its excellent wear-, corrosion-protection and low foaming tendency


Specifications


SRS Calibration Fluid CV meets the ISO standard 4113-CV-AW. SRS Calibration fluid CV is recommended by Bosch(VS 15665-OL-CV), MTU, MAN and Volkswagen. Further it is approved by MTU as a corrosion preventive oil for internalpreservation of fuel systems.

Approvals / Recommendations

  • ISO-standard 4113-CV-AW
  • Bosch-standard VS 15665-OL-CV
  • Bosch-Approval
  • MTU-Approval as a corrosion protection oil for inside preservation or conservation of fuel systems
  • MAN-Approval


SRS Calibration Fluid CV is a product of the H&R ChemPharm GmbH.

Typical data Test method SRS Calibration Fluid CV
Density at 15°C g/cm³ DIN 51 757 0.824
Viscosity at 20°C mm²/s DIN EN ISO 3104 3.85
Viscosity at 40°C mm²/s DIN EN ISO 3104 2.52
Flash point PM °C DIN EN ISO 2719 115
Cloud point °C ASTM D 2500 - 28
Initial Boiling Point °C DIN 51 751 232
Final Boiling Point °C DIN 51 751 265
Steel Corrosion Test Grade DIN ISO 7120 0 – A
Copper Corrosion Test Grade DIN ISO 2160 1
Corrosion Protection:
Humidity Cabinet Test Grade ASTM D 1748 6 x 0


The above values may vary within the commercial limits.

Дорогие друзья!

К сожалению, Ваш браузер не поддерживает современные технологии используемые на нашем сайте.

Пожалуйста, обновите браузер, скачав его по ссылкам ниже, или обратитесь к системному администратору, обслуживающему Ваш компьютер.

Internet Explorer

Microsoft

Chrome

Google

Safari

Apple

Opera

Opera Software

Firefox

Mozilla

Вверх