Валюта: Р $

Корзина: пусто

ОБЩАЯ СУММА (с учетом скидки)пусто

Перейти в корзину

DL-HEUI0037 Equipment for 0-8 bar pressure generation for checking of HEUI unit injectors using the test bench TRIUMF

Article: no article
В наличии
0 Р
Количество:
  • Overview

Обзор

DL-HEUI0037 Equipment for 0-8 bar pressure generation for checking of HEUI unit injectors using the test bench TRIUMF

1. 24-DBK-06L Three-way valve 3/8" 1 pc.

2. 26-04020-06 Connecting sleeve 3/8" 1 pc.

3. 13-VMP-06 Safety valve (SV) 3/8" 1 pc.

4. UNI20024 SV mounting bracket to oil filter with 2 screws M16x16mm 1 pc.

5. 13-VRFB04 Throttle 1/4" 1 pc.

6. UNI31316 SS washer 50x22mm “OIL SUPPLY” (FUEL SUPPLY) 1 pc.

7. 041616005 Support washer, hole diam. 22mm 1 pc.

8. UNI30020 Union 1/4"x8mm (discharge to tank from SV) 1 pc.

9. UNI30859 Union 3/8"x8mm (discharge from SV to tank) 1 pc.

10. UNI30530 Union 3/8"x3/8" (three-way valve: 2 pc. SV: 1 pc.) 3 pcs.

11. UNI30363 Banjo bolt 3/8" 2 pcs.

12. UNI30365 Banjo bolt 1/4" 1 pc.

13. 12-03-005 Banjo female, diam. 14mm (1/4") 1 pc.

14. 34-MA 16-08-14 Quick adapter, elbow, 8mm x 1/4" 2 pcs.

15. UNI31036 Special union 3/8"x3/8"x1/8" for supply 1 pc.

16. UNI31024 Special union 3/8"x3/8"x for leak-off 1 pc.

17. А50051-06-06 Elbow union 3/8"x8mm for special unions 2 pcs.

18. UNI20016 Pressure gauge bracket 1 pc.

19. 12-TG63-010 Flanged pressure gauge 0-10 bar 1 pc.

20. UNI30613 Pressure gauge sleeve 1/4"х 1/8" 1 pc.

21. 34-МА12-04-18 Quick adapter, diam. 4mm х 1/8" 1 pc.

22. 34-PTFE-04-250 PVC tube 4mm х 250mm for pressure gauge 1 pc.

23. Р1331012019-850 PVC tube 8mm х 850mm for drain from throttle to tank 1 pc.

24. T1-1ZTX-06-090 High-pressure fuel line 3/8"x 3/8" L=90 cm 1 pc.

25. 18-806-008-173 Low-pressure fuel line (LPFL) 8mm L=173cm (SV-Spec. union. "Oil Supply") 1 pc.

26. 18-806-008-155 LPFL 8mm L=155cm (Throttle-Special union "Oil Return") 1 pc.

27. 18-806-008-105 LPFL inside diam. 8mm L=105cm (SV-tank) 1 pc.

28. UNI20021 Washer with marking "FUEL SUPPLY" 1 pc.

28. UNI20022 Washer with marking "FUEL RETURN" 1 pc.

29. 0540159 Clamps 15mm 8 pcs.

31. 004636 Screw М3x6mm for pressure gauge mounting 3 pcs.

32. 0046435 Screw М4х35mm 6 pcs.

33. 0083645 Screw М6x45mm+washer+nut for SV mounting 2 sets

34. D-GM1504AN Rubber-metal washer 1/4" for banjo bolt on throttle 2 pcs.

35. D-GM1506AN Rubber-metal washer 3/8" for three-way valve 4 pcs.

ATTENTION! The three low-pressure fuel lines (LPFL, items 25, 26 and 27) can be supplied as a single 433cm LPFL

Дорогие друзья!

К сожалению, Ваш браузер не поддерживает современные технологии используемые на нашем сайте.

Пожалуйста, обновите браузер, скачав его по ссылкам ниже, или обратитесь к системному администратору, обслуживающему Ваш компьютер.

Internet Explorer

Microsoft

Chrome

Google

Safari

Apple

Opera

Opera Software

Firefox

Mozilla

Вверх