DL-CR31257 Pressure accumulator (rail) for testing injectors and pumps with cooling (for 2 pressure regulators)

Pressure accumulator (Rail) for testing pumps СР1, СР2, СР3, СР4, Delphi, Denso and CR injectors
Rail features cooling channels for improved thermal stability during testing and testing
Common-Rail injectors and pumps

The rail has threaded holes for:
pressure sensor connections (М18х1.5)
pressure regulator connections (2 holes М24х1,5mm)
connection of backflow fittings and plugs (4 holes 1/8 ")
hose or tube connection for rail cooling and plugs (5 holes 1/4 ")
supply and outlet of high pressure liquid from the rail (2 holes М24х1.5mm)
supply and exit of high pressure liquid from the rail from the side (2 holes М14х1.5mm)
rail fastening (4 blind holes M8)
Contents of delivery:

1. Pressure accumulator for 2 taxiways
2. DL-CR30497 Plug (М24х1.5mm) instead of pressure regulator (1 pc.)
3. DL-UNI30162 Plug (М18х1.5mm) instead of pressure sensor (1 pc.)
4. DL-UNI30020 DL-Fitting (1/4 "х8mm) for supplying and removing TJ for cooling (2 pcs.)
5. Dl-UNI30202 Cap (1/4 ") of the cooling channel (3 pcs.)
5. DL-UNI30293 Nipple (1/8 "x8mm) for return drain from the taxiway (1 pc.)
6. DL-UNI30203 Plug (1/8 ") for rubber gasket in the backflow channel (1 pc.)
7. DL-UNI31082 Plug (1/8 ") slotted in the backflow channel from the ends of the rail (2 pcs.)
6. DL-UNI31041 Fitting (M24x1.5mm X M14x1.5mm) for HPT (1 pc.)
7. DL-UNI31039 Plug (М24х1.5mm) for HP duct (1 pc.)
8. DL-UNI31535 Fitting (M14x1.5 X M14x1.5mm) for HPT (2 pcs.)
9. DL-UNI50271 Plug for fitting DL-UNI31535 (1 pc.)

ATTENTION! Regulators and pressure sensor are not included in the package!