DL-CR10030. Basic equipment kit for testing CR injectors
Обзор
Sets of basic equipment for checking CR injectors with a bead measuring unit, as well as with the possibility of connecting to the electronic measuring unit FLAGMAN-MUFI-CR and retrofitting with the FLAGMAN CODE coding system.
DL-CR10030 Basic equipment set for CR injectors testing with CR-tester CRT-5040 controller and HPFP 088. The basic equipment set is designed to test common rail injectors from different manufacturers (Bosch, Denso, Delphi, VDO (Siemens) Cummins, Caterpillar, AZPI.
1.DL-CR10031 Basic equipment set with FLAGMAN CRT-5040 controller without HPFPCP3 DL-CR000882 kit.
2. DL-CR10020 Basic equipment set without CR-tester controller CRT5040
3.DL-CR10021 Basic equipment set without CR-tester Controller CRT5040 and HPFP CP3 DL-CR00088.
The DL-CR00088 HPFP set is used with an operating pressure of 1800 bar.
The DL-CR00139 HPFP set is used with an operating pressure of 2400 bar and is available on request. Also when the DL-CR00139 is installed in the basic set, the sensor and pressure regulator must be replaced with 2400 bar and 2200 bar respectively.
Package contents
Equipment Kit for testing CR injectors, DL-CR10030 | ||
Name | Article | Amount |
Electronic part | ||
Common Rail injector testing controller | CRT-5000 | 1 pc |
Extension cable for injectors: socket “Injector” — 1.5 m | DL-CR10032 | 1 pc |
Cable for connecting high-pressure regulators HP1, HP2, HP3: “REG HP” socket – 2.0 m. | DL-CR10033 | 1 pc |
Cable for connection of low pressure regulators LP1, LP2: “REG LP” socket – 2.0 m. | DL-CR10034 | 1 pc |
Cable for connection of a pressure sensor “Bosch” type 1: socket “Sensor” – 2,0 m. | DL-CR10035 | 1 pc |
Cable for connection of the “Bosch” pressure sensor type 2: “Sensor” socket – 2.0 m. | DL-CR10036 | 1 pc |
Connectors for self-made cables in the sockets: Protection, Tank t C, Reg t C, Cycle, Pump, Invertor, Rpm, | DL-CR10037 | 7 pcs |
Reed switch for protection connection: “Protection” socket | DL-CR10038 | 1 pc |
Temperature sensor for monitoring the temperature of the liquid in the tank: socket “Tank t C” | DL-CR10039 | 1 pc |
* Temperature sensor for monitoring the backflow temperature of the injectors t C | DL-CR10042 | 4 pc |
Cable for BOSCH injectors (universal) | DL-CR10043 | 1 pc |
Cable for Delphi (C2i, C3i) injectors | DL-CR10044 | 1 pc |
Cable for Delphi (C3i) injectors | DL-CR10045 | 1 pc |
Cable for BOSCH,SIEMENS injectors | DL-CR10046 | 1 pc |
BOSCH injector cable | DL-CR10047 | 1 pc |
Cable for truck injectors “cap” type | DL-CR10048 | 1 pc |
Cable for truck injectors universal type | DL-CR10049 | 1 pc |
Power supply cable 220 V | – | 1 pc |
USB cable | – | 1 pc |
Manual | – | 1 pc |
Software Cascade | – | 1 pc |
Mechanical part | ||
Pressure sensor 1800 bar | DL-CR10050 | 1 pc |
*Pressure sensor 2200 bar | DL-CR10052 | 1 pc |
*Pressure sensor 2400 bar | DL-CR10053 | 1 pc |
Pressure regulator 1800 bar | DL-CR10051 | 1 pc |
*Pressure regulator 2200 bar | DL-CR10054 | 1 pc |
*Pressure regulator 2700 bar | DL-CR10055 | 1 pc |
Pressure accumulator “Rail” small | DL-CR30180 | 1 pc |
Pressure accumulator “Rail” for 2 regulators | DL-CR30181 | 1 pc |
*Pressure accumulator “Rail” for 2 regulators with cooling | DL-CR30188 | 1 pc |
*Safety valve for pressure accumulator 1800 bar | DL-CR10056 | 1 pc |
*Safety valve for pressure accumulator 2400 bar | DL-CR10057 | 1 pc |
Plug М14 | DL-CR50162 | 6 pcs |
High pressure lines M14 X 14 X 400 mm for injectors | DL-TVD41414 | 4 pcs |
High pressure line M14 X 14 X 300 mm for manometer | DL-TVD31414 | 1 pc |
High pressure line M14 X 14 X 300 mm for connection to “Rail” | DL-TVD31414 | 1 pc |
Connector М14 to М12 | DL-UNI50083 | 1 pc |
Fixing frame with injectors holders | DL-CR10015 | 1 pc |
Set of sleeves for dia. 17 mm / 18.9 mm / 19.1 mm / 20.9 mm for 4 pieces | DL-UNI50161 | 1 set |
Holder for nozzles 9 mm | DL-UNI30997 | 2 pcs |
Bracket for fixing frame with injector holders | DL-CR10025 | 1 pc |
Teflon line for connecting injectors dia. 6 mm | P1004 | 16 m |
Plug instead of pressure regulator | DL-UNI30497 | 2 pcs |
Plug instead of safety valve | DL-CR30493 | 1 pc |
DENSO backflow connection kit- banjo fitting, M8 x 1 mm bolt, copper washers 2 pcs | DL-CR10060 | 4 kits |
Backflow connection for “rail” (banjo 12 mm + bolt M12 + rubber-met. washers) | DL-CR10062 | 2 sets |
Adapter set for CR injector backflow connection | DL-24CRM | 1 комп |
Fixing bracket | DL-CR10028 | 1 pc |
Set of fasteners | DL-CR10063 | 1 pc |
Safety screen 6mm polycarbonate | DL-CR10006 | 1 pc |
Defoamers | DL-UNI30156 | 8 pcs |
Quick connectors to the defoamers | 34-RL310602 | 8 pcs |
Manometer 0-2000 bar | DL-CR14P2500 | 1 pc |
Connector 1/2″ X М14 (for manometer) | DL-UNI30287 | 1 pc |
Bracket for manometer | DL-KM2500 | 1 pc |
Set of equipment for high pressure pump CP3 DL-CR00088 1800 Bar | ||
HPFP СР-3 1800 bar | DHPFPL-CR10088 | 1 pc |
High pressure line М14 Х 14 X 400 mm for HPFP | DL-TVD51414 | 1 pc |
Adapter for mounting the pump on the bracket (diameter 107 mm) | DL-UNI30428 | 1 pc |
Coupling for connecting the pump to the drive | DL-M24 | 1 pc |
Rubber hose diam.8 mm | DL-CR10064 | 2 m |
Fitting (banjo 12 mm + bolt М12 + rubber.metal washers ) for HPFP | DL-CR10062 | 2 sets |
Clamps 13 mm for rubber hoses F8mm | DL-CR10066 | 4 pcs |
*Set of equipment for high pressure pump CP3 DL-CR00139 2400 bar | ||
HPFP СР-3 2400 bar | DL-CR10139 | 1 pc |
High pressure line М14 Х 14 X 400 mm for HPFP | DL-TVD51414 | 1 pc |
Adapter for mounting the pump on the bracket (diameter 107 mm) | DL-UNI30428 | 1 pc |
Coupling for connecting the pump to the drive | DL-M24 | 1 pc |
Rubber hose diam.8 mm | DL-CR10064 | 2 m |
Fitting (banjo 12 mm + bolt М12 + rubber.metal washers ) for HPFP | DL-CR10062 | 2 sets |
Clamps 13 mm for rubber hoses F8mm | DL-CR10066 | 4 pcs |
*Optional !