The CR-Test-2P test bench allows you to perform procedures related to the testing of high-pressure fuel pumps of the Common Rail system of various manufacturers (Bosch, Denso, Delphi, VDO (Siemens)). The design of the test stand CR-Test-2P and the elements of its equipment meet the requirements of international standards in terms of static and dynamic parameters-ISO 4008/1 and ISO 4008/2.

• Rotation speed:………………………………………………………………50-3500min-1
• Engine power ………………………………………………………………………11 kW
• number of tested pumps ……………………………………………………………1
• Tank capacity……………………………………………………………………30 dм3
• Power supply………………………………………………………3x400V/230V~ 50Hz
• Test fluid temperature control…………………………………….0-100±1 degr.С
• Electronic measurement of test fluid pressure in Rail in the range..0 – 1800±5bar
• Test fluid pressure setting…………………………………………….0 – 1800±5bar
**•Change in system pressure in the range………………………0 – 2400±5bar
• test fluid temperature control for flow meter…………………on each channel
• test fluid temperature control for flow meter………………………-20 - +90°С
•Tolerance of flow temperature measurement, no more than…………+/-2°C
• Measuring range of pumps………………………………………0,1l/min-20 l/min
•Tolerance of flow measurement10-150l/h……………………… no more :+/- 2l/h
• flow measurement tolerance up to 10 or more 150l/h……………no more 1%
• number of measur.sensors in the flowmeter …………………………………3
** • Cooling compressor capacity……………………………………………800W
• Capacity of the feed pump if Р= 0,3МПа ………………………………8,5 l/min
• Pressure gauge for feed pressure measurement………………………0÷0,16 МPa
• Pressure gauge after the feed pump………………………………0÷0,16 МPa
• Maximum current………………………………………………………………30A
• Calibrated oil heater capacity………………………………………………1000W
• protective screen…………………………………………………polycarbonate 8mm
• dimentions……………………………………width 1110,height 1610,depth 1210 mm
• total weight……………………………………………(netto 750 kg), (brutto 800 kg)

**by additional order