DL-CR31049 Pressure accumulator (rail) for testing injectors and pumps with cooling (for 3 pressure regulators)
Обзор
DL-CR31049 Pressure accumulator (rail) for testing injectors and pumps with cooling (for 3 pressure regulators)
Pressure accumulator (Rail) for testing pumps СР1, СР2, СР3, СР4, Delphi, Denso and CR injectors
Rail features cooling channels for improved thermal stability during testing and testing
Common-Rail injectors and pumps
The rail has threaded holes for:
pressure sensor connections (М18х1.5)
pressure regulator connections (3 holes M24x1.5mm)
backflow connections (3 holes 1/4 ")
hose or tube connection for rail cooling (2 holes 1/2 ")
supply and exit of high pressure liquid from the rail (3 holes М18х1.5mm)
cooling duct plugs (4 holes 1/8 ")
technological needs (1 hole М12х1.5mm)
rail fastening (6 blind holes M8)
Contents of delivery:
1. Pressure accumulator for 3 taxiways
2. DL-CR30497 Plug (М24х1.5mm) instead of pressure regulators (2 pcs.)
3. DL-UNI30162 Plug (М18х1.5mm) instead of pressure sensor (1 pc.)
4. DL-UNI30056 DL-Fitting (1/2 "x8mm) for supply and discharge of TJ for cooling (2 pcs.)
5. DL-UNI30020 Nipple (1/4 "х8mm) for the return drain from the taxiway (3 pcs.)
6. DL-UNI31478 Fitting (M18x1.5mm X M14x1.5mm) for HPT (3 pcs.)
7. DL-UNI50271 Plug for fitting DL-UNI31478 (1 pc.)
8. DL-UNI30203 Plugs (1/8 ") for cooling channels (4 pcs.)
9. DL-UNI30635 Plug (М12х1.5) for rubber-metal washer (1 pc.)
ATTENTION! Regulators and pressure sensor are not included in the package!
Extra
Additionally, with the DL-CR31049 pressure accumulator, it is possible to install drain rails:
DL-CR31514 Waste rail is designed to work with the main pressure accumulator (rail) with 3 installed taxiways.
It has three banjo inlets and two outlets. A plug is screwed into one outlet hole, and into the second a fitting, through which a common drain from 3 taxiways is carried out.
This drain bar facilitates the connection of the drain hoses.
Normally, the DL-CR31049 pressure accumulator is drained from each pressure regulator (RD). When using this rail, the drain is made from one fitting.
The package includes:
1. DL-UNI31519 1/4 "Banjo" (3 pcs.)
2. DL-UNI30203 Plugs 1/8 "(4 pcs.)
3. DL-UNI30112 Nipple for drainage from the rail M12x1.5 X 8mm (1 pc.)
4. DL-UNI30636 Plug М12х1.5mm (1 pc.)
DL-CR31528 Drain rail is designed to work with the main pressure accumulator (rail) with 2 installed taxiways.
It has two banjo inlets and one drain outlet. A fitting is screwed into the outlet, through which a common drain from 3 taxiways is carried out.
This drain bar facilitates the connection of the drain hoses.
Normally, the DL-CR31049 pressure accumulator is drained from each pressure regulator (RD). When using this rail, the drain is made from one fitting.
The set of delivery includes:
1. DL-UNI31519 1/4 "Banjo" (2 pcs.)
2. DL-UNI30203 Plugs 1/8 "(3 pcs.)
3. DL-UNI30112 Nipple for drainage from the rail M12x1.5 X 8mm (1 pc.)
DL-UNI21042 Bracket for pressure accumulator
